Stamped Concrete Sealer Varnish
Single-component product that compacts, waterproofs and increases the strength of concrete.
Technical data
- Reference
- N11A
- Base
- Ready to use
- Finish
- Semi-matt
- Surface
- Concrete and mortar
- Theoretical coverage
- 6-8 m²/L (per coat)
- Drying
- Touch dry: 30 min at 23ºC
Handling: 6 hours at 23ºC - Recoating
- Minimum: 6-8 hours at 23ºC
Maximum: None - Pack sizes
- 15L and 4L
Technical and safety data sheets
Solvent-based single-component product, physically drying and curing by solvent evaporation, that compacts, waterproofs and increases the strength of concrete. It enhances the colour and finish of the floor. Dustproof, it makes both dry and wet cleaning of the stamped concrete floors it is applied to easier. Applied to less porous surfaces, it gives satin finishes, forming a thin breathable and waterproof film that is fully resistant to cracking and yellowing outdoors.
Do you need information about this product?
We advise you on application, paint systems, colours, pack sizes and availability.
Other products in the family
Metal Varnish
Modified acrylic varnish prepared in organic solvents, specially formulated for ferrous and non-ferrous metal surfaces, with excellent adhesion also on galvanised steel.
- Universal
- Satin
Satin Multi-adhesion Enamel
Top-quality multi-adhesion enamel with a satin finish and silky feel. Excellent bonding to many substrates, in some cases even directly on galvanised steel.
- Thermoplastic acrylic
- Satin
Pliolite
High-performance smooth coating. Thanks to its microporous nature, it lets moisture inside buildings escape while waterproofing the treated surface and stopping water from getting in from outside.
- Synthetic
- Semi-matt
Swimming Pool Paint
Paint based on thermoplastic acrylic resins and special pigments that withstand sunlight and chlorinated water, for protecting and decorating swimming pools, ponds and NON-drinking water tanks built in…
- Thermoplastic acrylic and/or polyurethane
- Semi-matt
1K Acrylic Road Marking Paint, City
Acrylic paint that can be applied in thick coats. Specially designed for horizontal marking of public or private roads on unpolished concrete and asphalt, giving maximum coverage and…
- Polyurethane
- Satin
1K Acrylic Road Marking Paint
Excellent-quality acrylic paint that can be applied in thick coats. Specially designed for horizontal marking of public or private roads on unpolished concrete and asphalt, giving maximum coverage…
- Polyurethane
- Semi-matt
Thermoplastic Acrylic Anti-graffiti Varnish
Clear, colourless single-component varnish that protects surfaces against graffiti by forming a thin film on the surface. On treated surfaces the graffiti stays on the applied film without…
- Ready to use
- Gloss and Satin
Silicone Heat-resistant Paint
Single-component enamel with exceptional resistance to high temperatures up to 600 °C and/or occasional short peaks of up to 650 °C, with a metallic / aluminium or black…
- Ready to use
- Satin
Heat-resistant Silver 300-400 °C
Single-component enamel with exceptional resistance to high temperatures up to 400 °C and/or occasional short peaks of up to 450 °C, with a metallic or aluminium-coloured appearance thanks…
- Ready to use
- Satin
2K Acrylic Swimming Pool Finish
Two-component acrylic polyurethane enamel for coating, protecting and decorating swimming pools, especially outdoor ones. For application on polyester and fibreglass.
- Polyurethane
- Semi-gloss
2K Anti-graffiti Varnish
Clear, colourless two-component varnish that protects surfaces against graffiti by forming a thin film on the surface. It contains an anti-graffiti additive that makes it easier to remove…
- Acrylic
- Gloss, Satin and Matt
Acrylic Polyurethane UHS Satin/Matt 2K Finish
Two-component polyurethane enamel, especially suitable as the topcoat of high-resistance systems, outdoors and indoors, in highly aggressive environments. Recommended for processes in corrosivity categories C3, C4 and C5.
- Acrylic
- Satin and Matt
