1K Satin Acrylic Road Marking Enamel
Single-component coating, physically drying and curing by solvent evaporation. A satin finishing system for protecting and decorating floors that are not exposed to high mechanical friction.
Technical data
- Reference
- N11AS
- Base
- Polyurethane
- Finish
- Satin
- Surface
- Floors and paving
- Theoretical coverage
- 6-8 m²/L (per coat)
- Drying
- Touch dry: 30 min at 23ºC
Walkable (light loads): 90 min - Recoating
- Minimum: 2 hours at 23ºC
Maximum: None - Pack sizes
- 15L and 4L / 20Kg and 4Kg
Colores y referencias
Available in all the colours of the usual market charts (RAL, NCS, Pantone…).
Ask us, with no obligation, about colour availability.
Technical and safety data sheets
Single-component, solvent-based paint made with thermoplastic acrylic resins, physically drying and curing by solvent evaporation. A satin finishing system for protecting and decorating floors that are not exposed to high mechanical friction.
Do you need information about this product?
We advise you on application, paint systems, colours, pack sizes and availability.
Other products in the family
2K Epoxy Floor Coating 100% Solids
Two-component 100% solids coating formulated with solvent-free epoxy resins, for interior or covered exterior application. Together with its hardener it gives a product with excellent adhesion that forms…
- Ready to use
- Gloss
100% Solids Self-levelling Mortar
Two-component 100% solids coating formulated with solvent-free epoxy resins, for interior or covered exterior application. Together with its hardener it gives a product with excellent adhesion that forms…
- Ready to use
- Gloss
2K Acrylic Floor Varnish
Two-component aliphatic polyurethane varnish with a solvent-based acrylic base, for treating, decorating and protecting floors exposed to high mechanical friction. Applied directly on any properly prepared substrate.
- Acrylic
- Gloss, Matt and Satin
2K Polyurethane Floor Coating
Top-quality two-component polyurethane coating for interior and exterior application, long-lasting thanks to its high wear resistance. For floor treatment only.
- Polyurethane
- Gloss, Matt and Satin
Self-levelling Epoxy Mortar (100% Solids)
Top-quality two-component 100% solids coating formulated with solvent-free epoxy resins, for interior or covered exterior application. A product with excellent adhesion that forms a film of excellent hardness…
- Ready to use
- Gloss
Epoxy Anchor Mortar Primer (100% Solids)
Two-component 100% solids primer for interior or covered exterior application. A product with excellent adhesion that penetrates deep into concrete floors, helping later coats of paint to anchor…
- Ready to use
- Gloss
2:1 Epoxy Varnish
Two-component epoxy coating for interior or covered exterior application. Together with its polyamide-based hardener it gives a product with excellent adhesion that forms a film of excellent hardness…
- Epoxy
- Gloss
Epoxy Floor Anchor Primer
Two-component primer formulated with epoxy resins, for interior or covered exterior application. Together with its polyamide-based hardener it gives a product with excellent adhesion, especially on floors with…
- Ready to use
- Semi-gloss
2K Epoxy Floor Coating
Two-component epoxy coating for interior or covered exterior application. Together with its polyamide-based hardener it gives a product with excellent adhesion that forms a film of excellent hardness…
- Epoxy
- Semi-gloss
Chlorinated Rubber Floor Enamel
Single-component, solvent-based gloss floor paint formulated with chlorinated rubber resins, especially suitable for protecting and decorating floors. Surfaces painted with chlorinated rubber enamel are excellent for recoating, with…
- Chlorinated rubber
- Gloss
2K Epoxy Pitch
Two-component coating formulated with epoxy resins and bituminous compounds which, with its catalyst, gives a product suitable for protecting steel and other structural materials.
- Epoxy
- Satin
